| Ref: | KS-4 | |
| Price: | £ 240.00 |
Alarms, bed leaving, bed sheet, epilepsy, baby door alarm, bed seizure
This is a four channel desktop receiver powered by AC/DC power adapter with battery backup. When a signal is received from a transmitting device, the receiver’s built in sounder produces an audible alarm. A corresponding channel LED flashes to identify the transmitter. The monitor requires no installation simply plug in and use.
Ccompatible with the MP2 bed seizure alarm. If notification of a seizure is required for an office, staff room or sleep in night staff, the KS-4 would be your choice. If notification of a seizure is required for staff on the move, then the ELVP-4 pager would be your choice. You can use both. Each receiver is capable of monitoring up to four separate bed monitors. Both will raise an alarm then indicate by illuminated LED the bed monitor causing the alarm.
Specifications:
- Dimensions: 155mm x 105mm x 45mm
- Powered by 12V DC adaptor with battery backup. Backup time 8 hours continuous.
- Alarm output - permanent latch (must be manually reset)
- Internal sounder output 85db at 1M
- Output socket to drive external sounder, flashing light or vibrating pad (for deaf people or for silent alarm where disturbing others is a consideration)
- Power LED
- Backup battery LED
- Radio receiver - Saw stabilized with 10 bit binary coding 1024 combinations
- 433.92 MHz
- 100m range
- Dip switch coding